Standard Operating Procedure (SOP) for Cleaning of Stirrer

Cleaning of High Performance Liquid Chromatography (HPLC)

1. Purpose

The purpose of this Standard Operating Procedure (SOP)for Cleaning of Stirrer is to outline the step-by-step procedures for cleaning and maintaining stirrers within [Company Name]. This SOP for Cleaning of Stirrer aims to ensure proper cleaning practices, prevent cross-contamination, and maintain equipment hygiene for consistent and safe operations.

2. Scope

This SOP for Cleaning of Stirrer applies to all personnel responsible for operating, cleaning, and maintaining stirrers within [Company Name]. This SOP for Cleaning of Stirrer encompasses the cleaning process, safety measures, and documentation requirements.

3. Definitions involved in Cleaning of Stirrer

3.1 Stirrer:

A mechanical device used to mix or agitate substances in a container.

3.2 Cleaning Agent:

A designated solution or chemical used to clean and sanitize the stirrer.

3.3 Cleaning Validation:

The process of demonstrating that the cleaning procedure consistently and effectively removes residues and contaminants.

4. Equipment Preparation and Safety

5. Personal Protective Equipment (PPE)

5.1 Before initiating the cleaning process, personnel shall wear the required PPE, including gloves, safety goggles, and lab coats.

5.2 PPE shall be properly inspected for any damage or wear before use.

6. Power Disconnection

6.1 Ensure that the stirrer is powered off and disconnected from the electrical source before starting the cleaning process.

6.2 Safely unplug the power cord from the electrical outlet.

7. Cleaning Procedure

8. Initial Inspection

8.1 Visually inspect the stirrer for any visible residues, spills, or contaminants.

8.2 If present, remove any large debris or particles using a clean, dry cloth.

9. Preparation of Cleaning Solution

9.1 Prepare the designated cleaning solution according to the manufacturer’s instructions and company guidelines.

9.2 Ensure that the cleaning solution is suitable for the type of material used in the stirrer.

10. Cleaning Process

10.1 Dampen a clean, lint-free cloth or sponge with the prepared cleaning solution.

10.2 Gently wipe down all accessible surfaces of the stirrer, including the mixing blade, shaft, and housing.

10.3 Pay special attention to areas with visible residues or stains.

11. Rinse and Drying

11.1 After cleaning, use a separate clean cloth or sponge dampened with water to rinse off any remaining cleaning solution.

11.2 Thoroughly dry the stirrer with a clean, dry cloth to prevent moisture buildup.

12. Cleaning Validation and Documentation

13. Cleaning Validation

13.1 For critical or sensitive applications, cleaning validation may be required to demonstrate that the cleaning process effectively removes residues.

13.2 Follow the established cleaning validation procedure if applicable.

14. Documentation

14.1 Record the cleaning process details, including date, time, personnel responsible, cleaning solution used, and any observations.

14.2 Ensure that the cleaning log is signed and dated.

15. Equipment Reassembly and Safety Checks

16. Reassembly

16.1 After cleaning and drying, reassemble any removed components of the stirrer, such as blades or attachments.

16.2 Ensure that all components are securely attached and properly aligned.

17. Safety Checks

17.1 Perform a visual inspection to ensure that the stirrer is properly reassembled and free from any loose parts.

17.2 Reconnect the power source only after confirming proper reassembly and alignment.

18. References and Attachments

19. References

[List relevant guidelines, manufacturer’s recommendations, and industry references related to stirrer cleaning.]

20. Attachments

[List any attached documents, diagrams, or cleaning solution preparation guidelines.]

21. Revision History

[Document the revision history of this SOP for Cleaning of Stirrer, including dates, changes made, and personnel responsible.]

Website | + posts

Pharmacareer team is a team of Experts from every department of Pharmaceutical industry having enriched experience. Experts have work experience of many multinational pharmaceutical industries worldwide.

Leave a Reply

Your email address will not be published. Required fields are marked *