Standard Operating Procedure (SOP) for Cleaning of Autoclave

Cleaning of High Performance Liquid Chromatography (HPLC)

1. Purpose of Cleaning of Autoclave

The purpose of this Standard Operating Procedure (SOP) for Cleaning of Autoclave is to establish a systematic process for the proper cleaning and maintenance of autoclaves within [Company Name]. This SOP aims to ensure the cleanliness, functionality, and safety of autoclaves used for sterilization.

2. Scope of Cleaning of Autoclave

This SOP applies to all personnel responsible for operating, cleaning, and maintaining autoclaves within [Company Name]. It encompasses the cleaning process, safety measures, and documentation requirements.

3. Definitions involved in Cleaning of Autoclave

3.1 Autoclave:

A device used for sterilizing equipment and materials by subjecting them to high-pressure saturated steam.

3.2 Cleaning Solution:

A designated cleaning agent used to remove residues, dirt, and contaminants from autoclave surfaces.

3.3 Sterilization Cycle:

The process of subjecting items to high-pressure steam to achieve sterilization.

4. Safety Precautions and Personal Protective Equipment (PPE)

4.1. PPE Requirements

4.1.1 Before initiating the cleaning process, personnel shall wear the required PPE, including gloves, safety goggles, and lab coats.

4.1.2 PPE shall be properly inspected for any damage or wear before use.

4.2. Power Disconnection

4.2.1 Ensure that the autoclave is powered off and disconnected from the electrical source before starting the cleaning process.

4.2.2 Safely unplug the power cord from the electrical outlet.

5. Cleaning Procedure

5.1. Interior Cleaning

5.1.1 Open the autoclave chamber and remove any visible residues, debris, or spills.

5.1.2 Wipe down the interior surfaces, including the chamber walls and shelving, using a clean cloth and the designated cleaning solution.

5.2. Tray and Rack Cleaning

5.2.1 Remove autoclave trays and racks from the chamber.

5.2.2 Wash the trays and racks with warm water and detergent to remove any soil or contaminants.

5.2.3 Rinse thoroughly and allow them to air dry.

5.3. Gasket and Seal Cleaning

5.3.1 Inspect the gasket and door seals for dirt, residue, or signs of wear.

5.3.2 Gently clean the gasket and seals using a soft cloth dampened with the cleaning solution.

5.4. Exterior Cleaning

5.4.1 Wipe down the exterior surfaces of the autoclave, including the control panel and door handle, using a clean cloth and the cleaning solution.

5.4.2 Pay special attention to areas that are frequently touched or exposed to dirt.

5.5. Water Reservoir Cleaning

5.5.1 If the autoclave has a water reservoir, empty and clean it according to manufacturer’s guidelines.

5.5..2 Remove any sediment or buildup from the reservoir.

5.6. Final Wipe Down

5.6.1 Perform a final wipe down of all surfaces with a clean, damp cloth to remove any residue from the cleaning solution.

5.6.2 Ensure that all cleaned components are thoroughly dry before reassembling the autoclave.

6. Inspection and Documentation

6.1. Post-Cleaning Inspection

6.1.1 Conduct a visual inspection of the autoclave to ensure that all residues and contaminants have been removed.

6.1.2 Address any areas that may still require cleaning.

6.2. Documentation

6.2.1 Record the cleaning process details, including date, time, personnel responsible, cleaning agents used, and any observations.

6.2.2 Ensure that the cleaning log is signed and dated.

Website | + posts

Pharmacareer team is a team of Experts from every department of Pharmaceutical industry having enriched experience. Experts have work experience of many multinational pharmaceutical industries worldwide.

Leave a Reply

Your email address will not be published. Required fields are marked *