Standard Operating Procedure (SOP) for Cleaning of Ultrasonic Bath

Standard Operating Procedure (SOP) for Calibration of Conductivity/TDS Meter

1. Purpose of Cleaning of Ultrasonic Bath

The purpose of this Standard Operating Procedure (SOP) is to provide guidelines for the proper cleaning and maintenance of the Ultrasonic Bath within [Company Name]. This procedure ensures the effective and safe use of the equipment and helps prevent contamination.

2. Scope of Cleaning of Ultrasonic Bath

This SOP applies to all personnel responsible for operating, cleaning, and maintaining Ultrasonic Baths within [Company Name]. It encompasses procedures for routine cleaning, disinfection, and record-keeping.

3. Definitions involved in Cleaning of Ultrasonic Bath

3.1 Ultrasonic Bath:

An equipment used for cleaning objects using ultrasonic vibrations and a cleaning solution.

4. Safety Precautions and Personal Protective Equipment (PPE)

4.1. PPE Requirements

4.1.1 Personnel involved in the cleaning of the Ultrasonic Bath must wear appropriate PPE, including lab coats, safety goggles, gloves, and any additional PPE as required.

4.1.2 Ensure that PPE is in good condition and properly fitted.

4.2. Chemical Safety

4.2.1 Handle all cleaning agents, solvents, and chemicals with care, following manufacturer instructions and safety data sheets.

4.2.2 Store chemicals in designated areas away from incompatible substances.

5. Equipment and Materials

5.1. Cleaning Supplies

5.1.1 Ensure the availability of cleaning supplies, including a suitable cleaning solution, soft brushes, and lint-free wipes.

5.2. Ultrasonic Bath Equipment

5.2.1 Ensure that the Ultrasonic Bath is in the “standby” or “off” mode before initiating the cleaning process.

6. Ultrasonic Bath Cleaning Procedure

6.1. Pre-Cleaning Checks

6.1.1 Inspect the Ultrasonic Bath for any visible contaminants, residues, or foreign objects.

6.1.2 Remove the cleaning basket or any items from the bath before proceeding with cleaning.

6.2. Cleaning Process

6.2.1 Fill the Ultrasonic Bath with the appropriate cleaning solution, following manufacturer recommendations for dilution.

6.2.2 Place the items to be cleaned into the bath, ensuring they are fully immersed.

6.2.3 Turn on the Ultrasonic Bath and set the timer according to the cleaning requirements.

6.3. Post-Cleaning Checks

6.3.1 After the cleaning cycle, remove the items from the bath.

6.3.2 Rinse the cleaned items with purified water to remove any cleaning solution residues.

7. Documentation and Recordkeeping

7.1. Cleaning Records

7.1.1 Maintain detailed records of each Ultrasonic Bath cleaning session, including date, time, cleaning solution used, and any issues encountered.

Website | + posts

Pharmacareer team is a team of Experts from every department of Pharmaceutical industry having enriched experience. Experts have work experience of many multinational pharmaceutical industries worldwide.

Leave a Reply

Your email address will not be published. Required fields are marked *